You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Fujitsu H Series Indoor Installation of Outdoor Units
print icon

Subject: Indoor Installation of H-Series Outdoor Units
 

Introduction
The following discussion is to address the practice of locating H-Series outdoor units to an indoor location. Based
upon requirements from the system owner, design engineer or architect, there may be various reasons for
consideration of installing the outdoor unit(s) to an indoor location. This may include, but is not limited to,
aesthetics, installation ease, outside element exposure, or locations detrimental to the outdoor unit, such as parking
lots where unit damage could occur.

 

Discussion
When desired, locating H-Series outdoor units to an indoor location may be performed. Careful consideration to the
topics discussed herein must be fully reviewed and compliance approved by any and all governing authorities.

 

See attached bulletin for more information...

 

We would suggest giving us a call or writing a support ticket on the specifics on what you want to do. Then we can better advise you.

 

Link To Full Article W/PDF

Feedback
0 out of 0 found this helpful

scroll to top icon