Dakin 17 Series RXB/RKB 09-24k

 

 

 

 

 

 

BTUH		Heat Pump								Wall Mounted								SEER				EER				HSPF				COP				Line Set						Max Length (Total/Vertical)									MOCP					Cooling (AHRI 95⁰ F)									Cooling (Min/Max)						Heating (AHRI 47⁰ F)					Heating (Min/Max)								Heating (AHRI 17⁰ F)							Heating (5⁰ F DB/WB)
9,000		RXB09AXVJU								FTXB09AXVJU								17.00				11.00				9.00				3.56				1/4" x 3/8"						66' / 33'									15					8,800									4,400/10,200						9,400					4,400/13,600								5,800							4,603
12,000		RXB12AXVJU								FTXB12AXVJU								17.00				8.50				9.00				3.30				1/4" x 3/8"						66' / 33'									15					11,000									4,400/13,000						11,300					4,400/16,200								7,200							5,533
18,000		RXB18AXVJU								FTXB18AXVJU								17.00				10.50				9.00				3.30				1/4" x 1/2"						98' / 33'									20					18,000									4,300/21,200						17,900					4,000/22,500								10,200							8,765
24,000		RXB24AXVJU								FTXB24AXVJU								17.00				11.00				9.00				3.68				1/4" x 5/8"						98' / 33'									20					21,200									6,000/22,200						21,200					4,100/27,300								11,800							10,381
BTUH		AC Only								Wall Mounted								SEER				EER				HSPF				COP				Line Set						Max Length (Total/Vertical)									MOCP					Cooling (AHRI 95⁰ F)									Cooling (Min/Max)
9,000		RKB09AXVJU								FTKB09AXVJU								17.00				11.00				-				-				1/4" x 3/8"						66' / 33'									15					8,800									4,400/10,200						PHASING OUT CY23-Q1 thru CY23-Q3 , replaced by 18.2 SEER2 HP Only- Confirm Availability
12,000		RKB12AXVJU								FTKB12AXVJU								17.00				8.50				-				-				1/4" x 3/8"						66' / 33'									15					11,000									4,400/13,000
18,000		RKB18AXVJU								FTKB18AXVJU								17.00				10.50				-				-				1/4" x 1/2"						98' / 33'									20					18,000									4,300/21,200
24,000		RKB24AXVJU								FTKB24AXVJU								17.00				11.00				-				-				1/4" x 5/8"						98' / 33'									20					21,200									6,000/22,200

 

 

Features/Controls:

 

Optional Wired Controls: None

 

Optional Wi-Fi Controls: None

 

Low Ambient Operation:  None- No cooling operation below 50 degrees

 

Wind Baffle: Not Available

 

Condensate Lift Pumps: DACA-CP1-1 Aspen Mini Univolt Inline Pump / DACA-CP3-1 Sauermann Si30 Mini Inline Condensate Pump / DACA-CP4-1 Aspen Mini White (External) Univolt Pump Kit (or equal)

 

Installation (Wiring): Use 4-Wire, 14AWG, Stranded, Non-Shielded Wire to Connect Outdoor to Indoor. Only Break L1 for proper condensate pump wiring (breaking L3 will result in a U4 Error Code).

 

Installation (General): Mount outdoor units MINIMUM of 2" above anticipated snowfall. 

 

ALLOWED LINESET LENGTHS:

See Below

 

RKB / RXB ADDITIONAL CHARGE:

 

See Below

 

Daikin Torque Rating:

See below

 

Fault Codes:

 

FAULT DIAGNOSIS (For Inverter only)

FAULT DIAGNOSIS BY REMOTE CONTROLLER The temperature display sections indicate corresponding codes. 1.      When  the  ON TIMER  CANCEL button  or OFF TIMER  CANCEL button  is  held  down  for 5 seconds, a “” indication flashes on the temperature display section.

ON TIMER CANCEL                                                                              OFF TIMER CANCEL

2.      Press  the  ON  TIMER  CANCEL  button  or  OFF  TIMER  CANCEL  button  repeatedly  until  a continuous beep is produced. •   The code indication changes as shown below, and notifies with a long beep.

ERROR CODE

MEANING

00

NORMAL

A1

INDOOR PCB ERROR

A3

DRAIN PUMP ABNORMAL

A5

ANTIFREEZE (COOLING)/HEAT EXCHANGER OVERHEAT (HEATING)

A6

INDOOR FAN MOTOR ABNORMAL

AH

ELECTRICAL AIR CLEANER ABNORMAL

C4

INDOOR HEAT EXCHANGER (1) THERMISTOR SHORT/OPEN

C5

INDOOR HEAT EXCHANGER (2) THERMISTOR SHORT/OPEN

C7

LOUVER LIMIT SWITCH ERROR

C9

INDOOR ROOM THERMISTOR SHORT/OPEN

E1

OUTDOOR PCB ERROR

E3

HIGH PRESSURE PROTECTION

E4

LOW PRESSURE PROTECTION

E5

COMPRESSOR MOTOR LOCK/COMPRESSOR OVERLOADED

E6

COMPRESSOR START-UP ERROR

E7

OUTDOOR DC FAN MOTOR LOCK

E8

AC INPUT OVER CURRENT

E9

EXV ERROR

EA

4 WAY VALVE ERROR

F3

DISCHARGE PIPE OVERHEAT

F6

HEAT EXCHANGER OVERHEAT

HO

COMPRESSOR SENSOR SYSTEM ERROR

H3

HIGH PRESSURE SWITCH ERROR

H6

COMPRESSOR FEEDBACK DETECTION ERROR

H7

FAN MOTOR OVERLOADED/OVERCURRENT/SENSOR ABNORMAL

H8

AC CURRENT SENSOR ERROR

ERROR CODE

MEANING

H9

OUTDOOR AIR THERMISTOR SHORT/OPEN

J1

PRESSURE SENSOR ERROR

J3

COMPRESSOR DISCHARGE PIPE THERMISTOR SHORT/OPEN/MISPLACED

J5

SUCTION PIPE THERMISTOR SHORT/OPEN

J6

OUTDOOR HEAT EXCHANGER THERMISTOR SHORT/OPEN

J7

SUBCOOLING HEAT EXCHANGER THERMISTOR SHORT/OPEN

J8

LIQUID PIPE THERMISTOR SHORT/OPEN

J9

GAS PIPE THERMISTOR SHORT/OPEN

L1

INVERTER OUTDOOR PCB ERROR

L3

OUTDOOR CONTROL BOX OVERHEAT

L4

HEAT SINK OVERHEAT

L5

IPM ERROR/IGBT ERROR

L8

INVERTER COMPRESSOR OVERCURRENT

L9

COMPRESSOR OVERCURRENT PREVENTION

LC

COMMUNICATION ERROR (OUTDOOR CONTROL PCB AND INVERTER PCB)

P1

OPEN PHASE OR VOLTAGE UNBALANCE

P4

HEAT SINK THERMISTOR SHORT/OPEN

PJ

CAPACITY SETTING ERROR

U0

INSUFFICIENT GAS

U2

DC VOLTAGE OUT OF RANGE

U4

COMMUNICATION ERROR

U7

COMMUNICATION ERROR (OUTDOOR CONTROL PCB AND IPM PCB)

UA

INSTALLATION ERROR

UF

PIPING & WIRING INSTALLATION MISMATCH/WRONG WIRING/INSUFFICIENT GAS

UH

ANTIFREEZE (OTHER ROOMS)

NOTE

1.  A short beep and two consecutive beeps indicate non-corresponding codes. 2.  To cancel the code display, hold the ON TIMER CANCEL button or OFF TIMER CANCEL button down for 5 seconds. The code display also cancel itself if the button is not pressed for 1 minute.

 

 

We are still looking for service manual. Call us if you need help.