You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Home > Product Information > Durozone Motor To Honeywell Zone Panel Wiring
Durozone Motor To Honeywell Zone Panel Wiring
print icon

If you have an older durozone zone damper and need to wire it to a new Honeywell Panel(HZ311, HZ322, HZ432) see picture below.

Typical Dampers that use this:

  • smz-2sw
Feedback
0 out of 0 found this helpful

scroll to top icon